Using the remote

The fan and light work separately, so you can run the fan, the light, or both.

The fan

Press the fan button once to turn the fan on at low. Keep pressing to step through: low, medium, high, reverse airflow, then off.

Reverse airflow pulls air up toward the ceiling. In winter, it gently moves the warm air that collects near the ceiling back around the room.

The light

• Light on/off: press the bulb button. The first time you use it, the light starts at 3500K and 60% brightness. After that, it remembers your settings.
• Brightness: press the + (top) or – (bottom) sun buttons on the ring. There are 5 steps, from 20% to 100%.
• Color: press 3000K for warm white, 4500K (the center button) for neutral white, or 6000K for cool white.

Everything off

The red All OFF button turns off the fan and the light together.

Does it remember my settings?

Yes. If you turn it off and on at the wall switch, it comes back on with the same settings. The exception: if you pressed All OFF before switching off at the wall, it starts on its default settings next time.

I’ve lost the remote

You can still use the wall switch. The fan and light come on with your last settings. For a replacement remote, contact us.

What battery does it use?

One CR2025 coin battery, included. Pull out the plastic tab before first use.

Questions? Email support@wundercool.com or call (833) 993-0569, Monday to Friday, 9:00 am to 5:00 pm.